Vacuum Cooling Knowledge Centre

Vacuum Cooling Moisture Loss Calculator

Estimate the baseline moisture removed during vacuum cooling from the product temperature drop and batch mass.

Enter your cooling duty

Baseline estimate

Temperature drop 16.0 °C
Indicative moisture loss 2.86%
Estimated moisture removed 57.1 kg
Estimated product mass after cooling 1,942.9 kg

Planning estimate only. Actual weight change varies with commodity, surface area, tissue structure, packaging, loading pattern, vacuum recipe and any hydro-vac water addition.

Engineering basis

NC State Extension reports average moisture loss during vacuum cooling of about 1% of product mass for each 10°F reduction in product temperature. Ten degrees Fahrenheit is approximately 5.6°C, so this calculator uses:

Indicative moisture loss (%) = temperature drop (°C) ÷ 5.6.

Read the NC State vacuum-cooling engineering guidance.

Why real product loss can differ

The 1%-per-10°F relationship is an engineering baseline rather than a guaranteed commodity result. Actual moisture removal depends on the product, exposed surface area, tissue structure, packaging, starting condition, final pressure, cooling recipe and how evenly the load cools.

Hydro-vac and water addition

Some vacuum-cooling systems use a controlled water mist to reduce visible wilting or replace part of the moisture removed during cooling. Water application should be validated for the crop, hygiene plan and packaging rather than treated as a universal setting.

Use the result for project planning

Combine this estimate with the Vacuum Cooler Sizing Calculator, Throughput Calculator and pallet vacuum cooler range. Final process settings should be confirmed through product testing and engineering review.