Vacuum Cooling Knowledge Centre
Vacuum Cooling Operating Cost Calculator
Build a transparent electricity-cost estimate from your own measured or supplier-confirmed running loads, utilisation and local tariff.
Enter your operating assumptions (illustrative inputs)
Estimated electricity use
Planning estimate only. Use measured or supplier-confirmed average running loads where possible. Standby electricity is excluded unless a standby load is entered above. The calculation excludes demand charges, maintenance, water, labour, refrigeration variations, power-factor charges, taxes and other site-specific costs.
How the operating-cost estimate works
The calculator adds the average running loads entered for the vacuum system, refrigeration and auxiliaries. Effective average power = active running power × active-time fraction + standby power × inactive-time fraction. It then applies the operating hours and local electricity tariff.
Use realistic average loads
Motor nameplate ratings are not the same as average electrical consumption. For a useful estimate, enter measured data or supplier-confirmed average running power for the proposed duty.
Why utilisation matters
A system may not draw its full running load for every minute of an operating shift. The utilisation factor applies to active-period loads only. When equipment or auxiliaries still consume power during inactive time, enter the measured total standby load separately. If your power figure is already averaged across the full shift, set utilisation to 100% and standby to zero to avoid double counting.
Continue the engineering review
Check production assumptions with the Vacuum Cooling Throughput Calculator, organise the duty with the Sizing Calculator, or request a project quotation.